8
May
Environmental management
8. 5. 2015, at 13.37, written by NTFEnvironment: earth, water, air. Principles of the ISO 14000 standard. Types of activities affecting the environment (locally, globally). Influence of the economy and legislation on environmental policies at home and abroad. Characterisation of waste and contaminants. Minimising waste materials. Secondary raw materials. Clean technologies.
8
May
Soil mechanics II
8. 5. 2015, at 13.32, written by NTFAnalyses and solving of typical geomechanical problems, for example: calculation of initial tension, calculation of increased tension in the soil due to external loads, calculation of water flow in soils and filter nets, calculation of shifts and displacements, theoretical basis for the analysis of the stability of sloping hillsides and riverbanks, stability analyses of natural ... Read more
8
May
Elementary geodesy II
8. 5. 2015, at 13.23, written by NTFBasics of photogrammetry. GPS basics. Remote sensing. Surveying and mapping.
8
May
Mathematics III
8. 5. 2015, at 13.16, written by NTFOrdinary differential equations (first and second order linear differential equations). Fundamentals of functions of several variables (graph, continuity, limits). Partial derivatives (definition and geometric interpretation; tangent plane to the graph, stationary points and their classification; gradient, directional derivative). Double and triple integrals (examples, introduction of new variables: polar, cylinder and spherical coordinates; usage).
7
May
The basics of mechanical engineering I
7. 5. 2015, at 15.42, written by NTFKinematics, link between kinematic and transport quantities, dynamics, work, power, impulse and momentum, moments of inertia, types of friction.
7
May
Management and processing of waste materials
7. 5. 2015, at 15.37, written by NTFGeneral information on how waste is generated, about quantities and types of waste materials, methods of waste collection and transport, waste management practices, types of landfills, environmental impacts, environmental protection and monitoring.
7
May
Mineral processing
7. 5. 2015, at 15.04, written by NTFCharacterisation of disperse systems (porosity, surface, shape and particle size, densities). Processes for increasing surfaces (crushing, grinding, physical laws, phenomenological laws). Processes for decreasing surfaces (agglomeration of particles, briquetting and pelleting). Separation processes for disperse systems (solid-liquid, solid-gas, screening, grading, thickening, filtration and dust removal). The processes of mixing (solid-solid, solid-liquid, liquid-liquid), sampling and storage ... Read more
7
May
Soil Mechanics I
7. 5. 2015, at 14.56, written by NTFThe content consists of the following narrow areas: the geotechnical properties of soils, methods for determining these properties with laboratory and field tests, the results of the application of general mechanics and fluid mechanics on soil, the principle of effective stress and the consolidation process, the analysis of the stress-strain state of the ground for ... Read more
7
May
Surveying I (Elementary geodesy I)
7. 5. 2015, at 14.51, written by NTFIntroduction to the theory of errors and the balancing account. Instruments and measurement methods. Triangulation networks. Polygonometric networks. Elevation networks.
7
May
Practical training I
7. 5. 2015, at 14.43, written by NTFThe study mentor requires the student to pass the obligatory industrial placement in the area or areas that they teach in the context of their subjects and habilitation. The content of the industrial placement must be coordinated between the institution offering the training and the professional mentor employed at this institution. If the study mentor ... Read more